Where To Place Carbon Monoxide Detectors In Your Logan House
Homeowners must protect against various risks like burglary, flooding, and fire. But what about something that can’t be discerned by human senses? Carbon monoxide creates unique challenges because you might never be aware that it’s there. Even so, implementing CO detectors can easily protect you and your household. Explore more about this potentially lethal gas and where to place carbon monoxide detectors in your Logan residence.
What Is Carbon Monoxide?
Referred to as the silent killer because of its absence of odor, color, and taste, carbon monoxide is a readily found gas produced by incomplete fuel combustion. Any fuel-utilizing appliance like an oven or fireplace may produce carbon monoxide. While you normally won’t have a problem, issues can present when an appliance is not frequently serviced or appropriately vented. These oversights could result in a proliferation of the potentially lethal gas in your residence. Generators and heaters of various types are commonly responsible for CO poisoning.
When subjected to lower amounts of CO, you might notice headaches, dizziness, fatigue nausea, or vomiting. Continuous exposure to elevated amounts may result in cardiorespiratory failure, and potentially death.
Tips On Where To Place Logan Carbon Monoxide Detectors
If your home lacks a carbon monoxide detector, get one today. Preferably, you ought to install one on every level of your home, and that includes basements. Here are several tips on where to place carbon monoxide detectors in Logan:
- Install them on each level, specifically in places where you use fuel-burning appliances, including water heaters, furnaces, gas dryers, and fireplaces.
- Always install one within 10 feet of bedroom areas. If you only get one CO detector, this is where to put it.
- install them about 10 to 20 feet away from potential CO producing appliances.
- Avoid affixing them immediately beside or above fuel-utilizing appliances, as a small amount of carbon monoxide could be discharged when they start and set off a false alarm.
- Fasten them to walls approximately five feet above the ground so they may sample air where people are breathing it.
- Avoid using them near windows or doors and in dead-air areas.
- Put one in areas above attached garages.
Inspect your CO detectors often and maintain them per manufacturer instructions. You will typically have to replace them within five or six years. You should also make certain any fuel-burning appliances are in in good working order and adequately vented.